Published by adminMar 21,2019

Turn off the lamp power supply switch. This is very crucial, safety first, cut off the electricity. If you do not turn off the switch, the wire is electric,which is very dangerous. Turn over the lamp shade, fixed the brackit on theceiling or other use position by screw. Normally the chimney of ceiling light has the rotate to get stuck, push into and get stuck, or have screw to secure.And the hole on the ceiling need to be mark up and need the percussion drilling to drill.For some ceiling lamps, the light source can be taken down. For LED ceiling lamp, many light sources are fixed with the chassis, so it can not be taken down.Notice that do not damage the LED ceiling lamp bead. 3. Connect the driver Pay attention to the distance between the two wires. If possible, try not to put the two wires under the same piece of metal.The purpose is to avoid short circuit and danger.If possible, pack more electrical insulating tape as well. Fasten the lamp shade on the lamp, push it in with...

Published by adminMar 20,2019

Shopping mall lighting is considered one of the most mature and rapid areas of LED applications. The shopping mall is not only a place to buy goods, but also to create an environment suitable for leisure. The shopping mall lighting effect is indeed indispensable, and the LED lighting has a strong advantage in expressiveness. However, LED can be more important in the lighting market of the market. It needs to be based on the specific lighting environment and the humanized needs of consumers, and refine the various performance parameters and lighting effects of each product. Shopping mall lighting design is the behavior of customers to purchase goods, in the process of browsing and selection, according to the customer's visual requirements and the characteristics of various products, the space in which each product is located, scientific design, in order to make customers feel comfortable Visual effects. The purpose of shopping mall lighting is to attract consumers' interest through ...

Published by adminMar 19,2019

As one of the hotel's profitable spaces, lighting design of hotel rooms are different from the bedroom lighting at home.Lighting design of hotel rooms combines the comfort of living and commercial value of the room. What can be done with room lighting to balance comfort and business value, and to avoid these common lighting bugs,what should we do? The requirements for lighting design of hotel rooms are to create a private space for the guests, creating a comfortable and relaxing atmosphere, providing guests with a rest, work and entertainment experience. At the same time, hotel rooms are commodities. The purpose of lighting design is to expand the value of the display rooms. The types of lamps used in the rooms are divided into four categories according to the purpose of use: reading lighting, accent lighting, indirect lighting, and decorative lighting. The room consists of three areas, the bedroom area, the passageway and the bathroom.  According to the different use of space in d...

Published by adminMar 16,2019

  The main construction quality problems of LED inground light are water penetration of lamps and intermediate junction box of lines. Therefore, when planning the construction plan of LED inground light, the power supply line should adopt the appropriate way of connection to minimize the intermediate joint. When the middle joint is unavoidable, it is necessary to find a way to set up a junction box in an appropriate position on the ground. When the light source is unpacked and assembled on the spot and connected, the sealing level of the light may be reduced due to the environment, improper operation and other reasons, leaving potential quality hazard. When necessary, it is critical to require the product to be equipped with a good light source and sufficient length of lamp holder line. Therefore, Alpha Lighting attach importance that a reasonable, comprehensive construction plan will improve the quality of the project. Power supply must be cut off before installation of LED ingrou...